Not yet registered? Join Now!
  •  
  • Our Company
  • Products
  • Solutions
  • Downloads & Services
    • En | Tr |
    Access our KNX solution catalogue
    Look through our Hotel Project Reference Brochure
    Find where our partners are located
    Give us a call
     

    75643150

    75643150 TOUCHSENSOR 3F M RTR KONFI GLAS R.3 P-W

    75643150
    75643150 TOUCHSENSOR 3F M RTR KONFI GLAS R.3 P-W
    DISPLAY__DIFF-SYMBOL
    INTEGRIERTER-BUSANKOPPLER__DIFF-SYMBOL

    TOUCHSENSOR 3F M RTR KONFI GLAS R.3 P-W

    Cat ref.:75643150
    prt.
    EAN No.:

    4011334383765

    P.U.:1 prt.
    Technical Characteristics
    close all open all
    Architecture
    Fixing mode:flush-mounting
    Technical version:configured
    Functions
    • with valve protection function
    • for switch, push-button, dimmer, blind and thermostat functions
    • controller operating modes: comfort, standby, night and frost/heat protection mode
    Controls and indicators
    • operation by gently touching the sensor surfaces on the white LED
    • with 2 additional display sensor surfaces
    • LED display with symbol display
    • display of operating mode, controller lockout, room/outside temperature, time (clock required)
    Connectivity
    • with button blocking function
    Voltage
    • operation with non-choked output of KNX voltage supply possible (pay attention to current consumption)
    • separate auxiliary power supply needed
    Measurement
    • value transmitter for dimming, position, brightness and temperature values 1 and 2 byte
    Materials
    RAL colour:RAL 9010 - Pure white
    Colour of design line:glass polar white
    Colour:polarwhite
    Material:glass
    Surface appearance:glossy
    Type of surface treatment:Tampography
    Dimensions
    Depth:23 mm
    Height:152 mm
    Width:81 mm
    LED control
    • with blue operation LED and 6 white status LEDs
    Installation, mounting
    • for vertical mounting
    Connection
    • with integral bus coupling unit
    • bus connection via connecting terminal
    Settings
    • single and two push-button operation parameterisable
    • end customer display scope parameterisable
    Equipment
    • for heating and/or cooling mode with/without auxiliary step
    • for individual single room temperature control
    • control parameter for heating / cooling unit pre-set
    • for continuous (PI) or switched (2-point) control
    Use
    • Display
    • integrated bus coupling unit
    Safety
    Protection index IP:IP20
    Halogen free:no
    Use conditions
    Operating temperature:-5 … 45 °C
    • additional connection for external temperature sensor
    • temperature measurement via internal temperature sensor or external communication object
    Identification
    Application, usage:KNX - operating systems
    Main design line:KNX - Berker R.3 - configured
    Secondary design line(s):KNX, Berker R.3
    Instructions
    • Only suitable for KNX.
    • 75643150
      75643150 TOUCHSENSOR 3F M RTR KONFI GLAS R.3 P-W
      75643150
    • 75643150
      DISPLAY__DIFF-SYMBOL
    • 75643150
      INTEGRIERTER-BUSANKOPPLER__DIFF-SYMBOL
    • 75643150 TOUCHSENSOR 3F M RTR KONFI GLAS R.3 P-W
    • DISPLAY__DIFF-SYMBOL
    • INTEGRIERTER-BUSANKOPPLER__DIFF-SYMBOL
    Back to KNX Touch Sensors - Berker R.3 Touch Sensor
    Data is subject to errors and technical modifications.
    Berker Turkey