LED floodlight with PIR 220/360 RF QL
Cat ref.: | TRE600 |
EAN No.: | 3250617579346 |
P.U.: | 1 prt. |
Bus system: | KNX |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
|
|
| |
| |
|
Number of binary inputs: | 1 |
Radio protocol: | KNX Radio |
Receiver category: | 2 |
Frequency: | 50/60 Hz |
Radio transmission frequency: | 868,3 MHz |
Radio transmission power: | < 10 mW |
|
Transmitter duty cycle: | 1 % |
Relative humidity (without condensation): | 0 … 65 % (without condensation) |
Detection Method: | Passive Infrared |
Range, frontal: | ≈ 12 m |
Range, side: | each ≈ 8 m |
|
Number of detection levels: | 2 |
Frontal detecting distance: | 12 m |
Side detecting distance: | 8 m |
Detection angle: | 360 ° |
Angle of vertical detection: | 100 ° |
Detection angle, settable: | each side ≈ 45 … 90 ° |
Diameter of the floor detection area: | 16 m |
RAL colour: | RAL 9010 - Pure white |
Material: | PC-ABS |
Surface appearance: | matt |
Nominal mounting height: | 2,5 m |
Recommended installation height: | 2,5 … 4 m |
Lumen: | 3400 lm |
Response brightness, adjustable: | ≈ 5 … 1000 lx , daytime operation |
Lighting power LED lamps: | 60 W |
| |
|
Maximum Mounting Height: | 4 m |
| |
|
Conductor cross-section (flexible): | 1 … 1,5 mm² |
Conductor cross-section (rigid): | 1 … 1,5 mm² |
| |
|
Response sensitivity, settable: | 10 … 100 % |
Delay time, adjustable: | ≈ 5 s … 15 mn |
Switch-off pre-warning to dimming value 50% for: | 30 s |
Number of radio channels: | 1 |
Number of quicklink links: | max. 20 transmitter/receiver |
Number of channels: | 1 |
Transmitter duty cycle: | 1 % |
Angle of horizontal detection: | 360 ° |
| |
| |
|
|
Operating temperature: | -20 … 45 °C |
Application, usage: | Motion detector, KNX radio- sensors |
Data is subject to errors and technical modifications.