Moulded Case Circuit Breaker X250 3P 40kA 100A TM HNB100U

EAN
3250613347635
Packaging
1 Piece

Technical properties

Archi­tec­ture
  • Number of poles
    3 P
Func­tions
  • Complete device with protec­tion unit
    Yes
  • Trip Unit
    TM A/A
  • Integ­rated earth fault protec­tion
    No
Config­ur­a­tion
  • Number of modules
    6
Main elec­trical features
  • Rated oper­a­tional voltage Ue
    220 / 415 V
  • Frequency
    50/60 Hz
Voltage
  • Rated insu­la­tion voltage
    800 V
  • Rated impulse with­stand voltage
    8 kV
  • With under voltage release
    No
Elec­tric current
  • Rated current
    100 A
  • Rated ulti­mate short-­cir­cuit breaking capa­city Icu under 690V AC IEC 60947-2
    4 kA
  • Thermal protec­tion nob setting xIN
    0.63 / 0.8 / 1
  • Breaking capa­city on 1 pole for IT 230V NF 60947-2
    51 kA
  • Breaking capa­city on 1 pole for IT 400V NF 60947-2
    9 kA
  • Rated service breaking capa­city Ics AC according IEC 60947-2
    50 %
  • Rated ulti­mate short-­cir­cuit breaking capa­city Icu under 230V AC IEC 60947-2
    85 kA
  • Rated ulti­mate short-­cir­cuit breaking capa­city Icu under 240V AC IEC 60947-2
    85 kA
  • Rated ulti­mate short-­cir­cuit breaking capa­city Icu under 400V AC IEC 60947-2
    40 kA
  • Rated ulti­mate short-­cir­cuit breaking capa­city Icu under 415V AC IEC 60947-2
    40 kA
  • Rated ulti­mate short-­cir­cuit breaking capa­city Icu under 440V AC IEC 60947-2
    30 kA
Current correc­tion factors
  • Correc­tion factor of rating current for 2 devices placed side-by-side
    1
  • Correc­tion factor of rating current for 3 devices placed side-by-side
    1
  • Correc­tion factor of rating current for 4 and 5 devices placed side-by-side
    1
  • Correc­tion factor of rating current for 6 devices placed side-by-side
    1
Power
  • Total power loss under IN
    24.8 W
  • Power loss per pole at In
    8.3 W
Trip­ping
  • Trip­mode
    TM
  • Thermal protec­tion trip time
    0 ms
  • Time of response when opening
    10 ms
Elec­trical specific­a­tions
  • Magnetic trip delay time
    0 ms
Endur­ance
  • Elec­tric endur­ance in number of cycles
    1000
  • Number of mech­an­ical oper­a­tions
    4000
Install­a­tion, mounting
  • DIN rail mounting with optional adapt­ator
    Yes
Connec­tion
  • Connec­tion cross-sect. flex­ible conductor
    35 / 150mm²
  • Type of connec­tion
    Terminal
Settings
  • Range of the magnetic adjust­ment
    600 / 800 / 1000 / 1300 A
  • Magnetic protec­tion nob setting xIN
    6 / 8 / 10 / 13
  • Setting type In or Ith
    IN
Equip­ment
  • Number of auxil­iary contacts as normally closed contact
    0
  • Number of auxil­iary contacts as normally open contact
    0
  • Number of auxil­iary contacts as change-over contact
    0
  • Motor drive optional
    Yes
Stand­ards
  • European directive WEEE
    concerned
Safety
  • Protec­tion index IP
    IP4X
Use condi­tions
  • Oper­ating temper­ature
    -25…70 °C
  • Alti­tude
    2000 m
  • Air humidity protec­tion
    for all climates
  • Stor­age/trans­port temper­ature
    -35…70 °C

Downloads

  • Images

    Images may be subject to copyright

    Image HNB100U  | Hager

    Product Image HNB100U

  • ProductNotice

    Image Instruction manuals for HNB100U  | Hager

    Instruction manuals for HNB100U

    PDF
    9 MB
  • ProductDataSheet

    Image Product data sheets for HNB100U  | Hager

    Product data sheets for HNB100U

    UK_PD_TDS_MCCBx250.pdf

    PDF
    1 MB
  • ProductECDeclaration

    Image EU Declaration of conformity for HNB100U  | Hager

    EU Declaration of conformity for HNB100U

    Declaration

    PDF
    493 KB
  • ProductEnvironmentProfile

    Image Product environmental profile for HNB100U  | Hager

    Product environmental profile for HNB100U

    PDF
    435 KB
  • ProductROHS

    Image RoHS certificate for HNB100U  | Hager

    RoHS certificate for HNB100U

    PDF
    32 KB
    Image RoHS certificate for HNB100U  | Hager

    RoHS certificate for HNB100U

    PDF
    33 KB
More documentation